Cisco Paket Tracer

saya akan memposting tentang cisco paket tracer , berikut langkah langkah nya agak rumit, semoga mengerti🙂

Langkah-langkah membangun jaringan 5 Router :

1.Tentukan IP Router yang diinginkan :

  • Router 1

Fa0/0   : 20.20.20.1

Fa1/0   : 100.100.100.1

  • Router 2

Fa0/0   : 130.130.130.1

Fa1/0   : 100.100.100.2

Fa2/0   : 180.180.180.1

  • Router 3

Fa0/0   : 200.200.200.1

Fa2/0   : 180.180.180.2

Fa3/0   : 192.192.192.1

2.Tentukan IP Address pada masing-masing PC :

Contoh :

  • PC 1

IP Address                  : 20.20.20.2

Subnet Mask               : 250.250.250.0

Default Gateway        : 20.20.20.1

  • PC 2

IP Address                  : 20.20.20.3

Subnet Mask               : 250.250.250.0

Default Gateway        : 20.20.20.1

  • PC 3

IP Address                  : 20.20.20.4

Subnet Mask               : 250.250.250.0

Default Gateway        : 20.20.20.1

3. Lalu, lakukan hal yang sama pada PC 4 s/d PC 15. Yaitu menentukan IP Address, Subnet Mask, dan Default Gateway seperti diatas

4. Setting IP Address, Subnet Mask, dan Default Gateway pada PC :

  • Klik pada PC > Pilih Tab Desktop > Pilih IP Configuration > Lalu masukkan IP Address, Subnet Mask, dan Default Gateway sesuai yang sudah ditentukan diatas pada masing-masing PC.

5. Selanjutnya setting konfigurasi IP Address pada masing-masing router.

  • Setting Router 1 pada interface fa0/0 dan interface fa1/0. Untuk interface fa0/0 berikut dibawah ini :
  • Klik pada Router > Pilih Tab CLI > Ketik perintah berikut

Router>en

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#interface fa0/0

Router(config-if)#ip add 20.20.20.1 255.255.255.0

Router(config-if)#no sh

Router(config-if)#ex

Router(config)#ex

%SYS-5-CONFIG_I: Configured from console by console

Router#write

Building configuration…

[OK]

  • Untuk interface fa1/0 berikut dibawah ini :

Router(config)#interface fa1/0

Router(config-if)#ip add 100.100.100.1 255.255.255.0

Router(config-if)#no sh

Router(config-if)#ex

Router(config)#ex

%SYS-5-CONFIG_I: Configured from console by console

Router#write

Building configuration…

[OK]

6. Lalu, lakukan hal yang sama pada Router 2 s/d Router 5. Yaitu menentukan IP Address, pada masing-masing Router seperti perintah diatas.

7. Melakukan IP Routing pada masing-masing Router

  • Klik pada Router > Pilih Tab CLI > Ketik perintah berikut
  • IP Routing Router 1
  • (Pada interface fa0/0 ke interface 1/0 pada Router 2)

Router>en

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#ip route 130.130.130.0 255.255.255.0 100.100.100.2

  • (int fa 0/0 > int fa2/0 > int fa1/0 pada Router 3)

Router(config)#ip route 200.200.200.0 255.255.255.0 180.180.180.2

Router(config)#ip route 180.180.180.0 255.255.255.0 100.100.100.2

  • int fa 0/0 > int fa3/0 > int fa2/0 >int fa1/0 pada Router 4)

Router(config)#ip route 50.50.50.0 255.255.255.0 192.192.192.2

Router(config)#ip route 192.192.192.0 255.255.255.0 180.180.180.2

Router(config)#ip route 180.180.180.0 255.255.255.0 100.100.100.2

  • (int fa 0/0 > int fa1/0 > int fa3/0 >int fa2/0 > int fa1/0 pada Router 5)

Router(config)#ip route 170.170.170.0 255.255.255.0 90.90.90.2

Router(config)#ip route 90.90.90.0 255.255.255.0 192.192.192.2

Router(config)#ip route 192.192.192.0 255.255.255.0 180.180.180.2

Router(config)#ip route 180.180.180.0 255.255.255.0 100.100.100.2

  • IP Routing Router 2
  • (pada interface fa0/0 ke interface 1/0 pada Router 1)

Router>enable

Router#configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#ip route 20.20.20.0 255.255.255.0 100.100.100.1

  • (int fa 0/0 > int fa2/0 pada Router 3)

Router(config)#ip route 200.200.200.0 255.255.255.0 180.180.180.2

  •  (int fa0/0 > int fa 3/0 > int fa 2/0 pada Router 4)

Router(config)#ip route 50.50.50.0 255.255.255.0 192.192.192.2

Router(config)#ip route 192.192.192.0 255.255.255.0 180.180.180.2

  • (int fa0/0 > int fa1/0 > int fa3/0 > int fa2/0 pada Router 5)

Router(config)#ip route 170.170.170.0 255.255.255.0 90.90.90.2

Router(config)#ip route 90.90.90.0 255.255.255.0 192.192.192.2

Router(config)#ip route 192.192.192.0 255.255.255.0 180.180.180.2

  • IP Routing Router 3
  • (pada int fa0/0 > int fa1/0 > int fa2/0  pada Router 1)

Router>en

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#ip route 20.20.20.0 255.255.255.0 100.100.100.1

Router(config)#ip route 100.100.100.0 255.255.255.0 180.180.180.1

  • (pada int fa1/0 > int fa2/0  pada Router 2)
  • Router(config)#ip route 130.130.130.0 255.255.255.0 180.180.180.1
  • (pada int fa0/0 > int fa3/0  pada Router 4)
  • Router(config)#ip route 50.50.50.0 255.255.255.0 192.192.192.2
  • (pada int fa0/0 > int fa1/0 > int fa3/0  pada Router 5)

Router(config)#ip route 170.170.170.0 255.255.255.0 90.90.90.2

Router(config)#ip route 90.90.90.0 255.255.255.0 192.192.192.2

  • IP Routing Router 4
  • (pada int fa0/0 > int fa1/0 > int fa2/0 > int fa3/0  pada Router 1)

Router(config)#ip route 20.20.20.0 255.255.255.0 100.100.100.1

Router(config)#ip route 100.100.100.0 255.255.255.0 180.180.180.1

Router(config)#ip route 180.180.180.0 255.255.255.0 192.192.192.1

  • (pada int fa0/0 > int fa2/0 > int fa3/0  pada Router 2)

Router(config)#ip route 130.130.130.0 255.255.255.0 180.180.180.1

Router(config)#ip route 180.180.180.0 255.255.255.0 192.192.192.1

  • (pada int fa0/0 > int fa3/0  pada Router 3)

Router(config)#ip route 200.200.200.0 255.255.255.0 192.192.192.1

  • (pada int fa0/0 > int fa1/0  pada Router 5)

Router(config)#ip route 170.170.170.0 255.255.255.0 90.90.90.2

  • IP Routing Router 5
  • (pada int fa0/0 > int fa1/0 > int fa2/0 > int fa3/0 > int fa1/0  pada Router 1)

Router>en

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#ip route 20.20.20.0 255.255.255.0 100.100.100.1

Router(config)#ip route 100.100.100.0 255.255.255.0 180.180.180.1

Router(config)#ip route 180.180.180.0 255.255.255.0 192.192.192.1

Router(config)#ip route 192.192.192.0 255.255.255.0 90.90.90.1

  • (pada int fa0/0 > int fa2/0 > int fa3/0 > int fa1/0  pada Router 2)

Router(config)#ip route 130.130.130.0 255.255.255.0 180.180.180.1

Router(config)#ip route 180.180.180.0 255.255.255.0 192.192.192.1

Router(config)#ip route 192.192.192.0 255.255.255.0 90.90.90.1

  • (pada int fa0/0 > int fa3/0 > int fa1/0  pada Router 3)

Router(config)#ip route 200.200.200.0 255.255.255.0 192.192.192.1

Router(config)#ip route 192.192.192.0 255.255.255.0 90.90.90.1

  • (pada int fa0/0 > int fa1/0  pada Router 4)

Router(config)#ip route 50.50.50.0 255.255.255.0 90.90.90.1

8. Sekarang, lakukan ping ke PC yang berbeda. Contoh : ping dari PC-PT 1 ke PC-PT 4.

  • Klik pada PC-PT 1 > Pilih Tab Desktop > Pilih Command Prompt.

Ketik ping 130.130.130.2 (PC-PT 2) > Enter

92

  • PC-PT 6 ke PC-PT 1.

99

  • Lakukan hal yang sama seperti diatas, “ping” pada setiap PC ke PC yang berbeda IP Address.

Contoh Jika sudah selesai :

65

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s